Daily Inspection and Maintenance of Concrete Batching Plant

The normal operation of mechanical equipment is inseparable from regular maintenance. No equipment is non-wearing. Of course, the equipment of yhzs25 concrete batch plant is also a mechanical equipment. Of course, it also needs regular maintenance to ensure its normal operation. So, what are the daily inspections of the equipment of the concrete mixing plant?

1. Check the working conditions of the lubrication points of each rotating part every day, and replenish the lubricating oil in time.

2. Check the amount of lubricating oil in the lubricating oil cup of the mixer every day, and replenish the lubricating oil in time.

3. Check the oil level of the lubricator on the gas system once a week, and use lubricating oil with a viscosity of 2.5~7°E.

4. Open the drain valve once a day before and after yhzs25 mobile concrete batch plant is turned on to discharge the condensed water in the air compressor and gas storage tank.

5. Fasteners (such as bolts and nuts) should be checked weekly for looseness. If any looseness is found, they must be tightened in time, especially for parts subject to variable amplitude loads.

6. Check whether the equipment of the water supply, gas supply and admixture system is normal every day.

7. Check whether the electrical control system and various instruments are normal every day.

8. Check whether the mixing shaft and the whole of the concrete mixer are clean and clean every day. If there is too much concrete condensed on the mixing shaft, it must be cleaned manually.

9. Clean or replace the filter in the dust collector of the powder tank every six months.

10. If yhzs25 mobile concrete batching plant is down for more than a week, the materials in each measuring hopper must be emptied, and the mixing host, discharge hopper, etc. must be cleaned to avoid material compaction.